Understanding the effects of off-state and hard-switching stress in gallium nitride-based power transistors

The aim of this paper is to improve the understanding of gallium nitride (GaN) high electron mobility transistors (HEMTs) submitted to hard switching operation, with focus on the hot-electron phenomena. This is becoming a hot-topic both for the scientific community and for the industry. The analysis is carried out through a cross-comparison of three different experimental techniques: Conventional Pulsed-IV characterization, a novel pulsed-drain current transient (P-DCT) method, and a custom-developed hard switching test protocol. Hard switching analysis was performed through a novel system able to test the device in hard-switching conditions with an unprecedented turn-on slew-rate of 25 V ns-1 on-wafer level. This allows μs to investigate the impact of hard switching in terms of (i) locus trajectory, (ii) dissipated power, and (iii) dynamic Ron increase. Furthermore, the accumulation of switching stress is assessed by repeating the experiment with increasing frequency, from 1 kHz to 100 kHz. The extensive cross-analysis offers a novel insight on the degradation mechanisms occurring in power GaN HEMTs. The results collected within this paper allow: (1) to evaluate the dynamic behavior under both soft- and hard-switching stress, thus differentiating off-state and semi-on-state stress; (2) to pinpoint hot-electrons as the main cause of the current collapse observed in semi-on; (3) by comparing the results obtained from P-DCT and Hard Switching Analysis we demonstrate that the hot-electron trapping is a very fast process which can happen in few ns. The related trapping and de-trapping kinetics are investigated in detail. The results described within this paper provide novel insight on the important role of hot-electrons in the dynamic Ron increase during hard switching operations.