Solar assisted ground source heat pump in cold climates

The geothermal heat pump(or ground source heat pump) uses the ground as heat source or sink for heating and cooling respectively. The design of the borehole field is the key element of these systems since the wrong evaluation of the boreholes’ length affects the initial costs and/or the energy performance of the heat pump. The geothermal heat pumps are considered as renewable energy technologies, consequently can help the community to reduce the primary energy uses and also the CO2 emissions. However the sustainability and efficiency are ensured in the long period only when the heat balance through the ground is guaranteed. This work evaluates the thermal behavior of ground source heat pumps in cold climates, where the thermal load profile of buildings is not balanced between heating and cooling, especially in residential sector characterized by low internal loads. In these contexts, the heat pump mainly works in heating mode, extracting continuously heat from the ground. As a result, the ground temperature decreases gradually during the years affecting the energy performance of the heat pump. A possible solution to this problem is to use solar thermal collectors to stabilize or gradually increase the mean ground temperature(these systems are called Solar Assisted Ground Source Heat Pump – SAGSHP). In this work a multi floors residential building with 12 flats (88 m2 each)is analyzed in three climate zones, making use of the simulation tool TRNSYS. Different configurations of the plant system have been investigated and the case without the solar thermal collectors has been considered as reference.