Novel magnetic inorganic composites: Synthesis and characterization

The addition of magnetic particles to inorganic matrices can produce new composites exhibiting intriguing properties for practical applications. It has been previously reported that the addition of magnetite to concrete improves its mechanical properties and durability in terms of water and chloride ions absorption. Here we describe the preparation of novel magnetic geopolymers based on two different matrices (G1 without inert aggregates and G2 with inert quartz aggregates) containing commercial SrFe12 O19 particles with two weight concentrations, 6% and 11%. The composites’ characterization, including chemical, structural, morphological, and mechanical determinations together with magnetic and electrical measurements, was carried out. The magnetic study revealed that, on average, the SrFe12 O19 magnetic particles can be relatively well dispersed in the inorganic matrix. A substantial increase in the composite samples’ remanent magnetization was obtained by embedding in the geopolymer SrFe12 O19 anisotropic particles at a high concentration under the action of an external magnetic field during the solidification process. The new composites exhibit good mechanical properties (as compressive strength), higher than those reported for high weight concretes bearing a similar content of magnetite. The impedance measurements indicate that the electrical resistance is mainly controlled by the matrix’s chemical composition and can be used to evaluate the geopolymerization degree.