A Calcium silicate hydrate (CSH) powder containing above 60 wt% xonotlite (remaining being tobermorite, scawtite and calcite) were produced from lime and ordinary recycled soda-lime glass via simple hydrothermal synthesis route. The thermogravimetric analysis demonstrated only ~20%weight loss up to 800 °C (at about the transformation temperature of CSHs to wollastonite), reaching a plateau in the 800-1200 °C temperature range. The synthesized CSH powder was employed for the fabrication of both green and heat-treated scaffolds by additive manufacturing (AM), possessing a high porosity (>80 vol%) and limited strength (~0.9 MPa).
Synthesis and additive manufacturing of calcium silicate hydrate scaffolds
Botti R.;Colombo P.;Vakifahmetoglu C.
2021
Abstract
A Calcium silicate hydrate (CSH) powder containing above 60 wt% xonotlite (remaining being tobermorite, scawtite and calcite) were produced from lime and ordinary recycled soda-lime glass via simple hydrothermal synthesis route. The thermogravimetric analysis demonstrated only ~20%weight loss up to 800 °C (at about the transformation temperature of CSHs to wollastonite), reaching a plateau in the 800-1200 °C temperature range. The synthesized CSH powder was employed for the fabrication of both green and heat-treated scaffolds by additive manufacturing (AM), possessing a high porosity (>80 vol%) and limited strength (~0.9 MPa).
| File | Dimensione | Formato | |
|---|---|---|---|
|
1-s2.0-S2238785421000909-main.pdf
accesso aperto
Tipologia:
Published (Publisher's Version of Record)
Licenza:
Creative commons
Dimensione
1.91 MB
Formato
Adobe PDF
|
1.91 MB | Adobe PDF | Visualizza/Apri |
Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
