Lead zirconate titanate (PZT) thin films were deposited by rf magnetron sputtering on Pt/Ti/SiO(2)//Si, Au/Ti/SiO2//Si, ITO//glass electrodes and on Si (100) substrates. As deposited films show large excesses of Pb and O and contain different Pb oxides. Annealing treatments in air at 650 and 750 degrees C carried out in a preheated muffle furnace lead to a decrease of Pb and O content and to formation of the perovskite phase via an intermediate nanocrystalline pyrochlore phase. Phase pure perovskite films are obtained on Pt and ITO electrodes by annealing at 750 degrees C for similar to 10 min, while for the same treatment significant amounts of pyrochlore remained on Au electrodes and on Si substrates.
Structural characterization of lead zirconate titanate thin films prepared on different electrodes and on silicon substrates
GAROLI, DENIS;ROMANATO, FILIPPO
2011
Abstract
Lead zirconate titanate (PZT) thin films were deposited by rf magnetron sputtering on Pt/Ti/SiO(2)//Si, Au/Ti/SiO2//Si, ITO//glass electrodes and on Si (100) substrates. As deposited films show large excesses of Pb and O and contain different Pb oxides. Annealing treatments in air at 650 and 750 degrees C carried out in a preheated muffle furnace lead to a decrease of Pb and O content and to formation of the perovskite phase via an intermediate nanocrystalline pyrochlore phase. Phase pure perovskite films are obtained on Pt and ITO electrodes by annealing at 750 degrees C for similar to 10 min, while for the same treatment significant amounts of pyrochlore remained on Au electrodes and on Si substrates.Pubblicazioni consigliate
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.