CARRARO, PAOLO ANDREA
CARRARO, PAOLO ANDREA
Dipartimento di Tecnica e Gestione dei Sistemi Industriali - DTG
Characterization and modelling of the microstructural and mechanical properties of additively manufactured continuous fiber polymer composites
2025 Cuccarollo, P.; Pontefisso, A.; Carraro, P. A.; Quaresimin, M.
Health monitoring of bonded joints through electrical measurements
2024 Carraro, P. A.; Pontefisso, A.; Panozzo, F.; Quaresimin, M.; Zappalorto, M.
Influence of the mesostructure on the fatigue behaviour of textile composites
2024 Lamon, F.; Maragoni, L.; Carraro, P. A.; Quaresimin, M.
Modeling the high-cycle fatigue crack initiation in short fiber reinforced polymers with notches
2024 Pietrogrande, R.; Carraro, P. A.; Zappalorto, M.; De Monte, M.; Quaresimin, M.
A novel method to include crack-induced delamination in a fatigue damage predictive procedure for composite laminates
2023 Maragoni, L.; Carraro, P. A.; Simonetto, M.; Quaresimin, M.
Fatigue damage evolution in glass/epoxy cross-ply laminates under spectrum loadings
2023 Carraro, P. A.; Simonetto, M.; Quaresimin, M.
Fatigue damage evolution in woven composites with different architectures
2023 Lamon, F.; Maragoni, L.; Carraro, P. A.; Quaresimin, M.
Modelling the thermoelectric behaviour of composite laminates in the presence of transverse cracks
2023 Carraro, P. A.; Pontefisso, A.; Quaresimin, M.
A multiscale strategy for assessing the micro-scale stress distribution in the matrix of textile composites
2022 Lamon, F; Carraro, Pa; Maragoni, L; Quaresimin, M
Crack initiation and evolution in glass/epoxy laminates under two-stage block loadings
2022 Simonetto, M.; Carraro, P. A.; Maragoni, L.; Quaresimin, M.
Damage evolution in cross-ply laminates under tension–compression and compression-compression cyclic loads
2022 Carraro, P. A.; Maragoni, L.; Quaresimin, M.
Modelling the correlation between the electrical resistance and stiffness degradation in conductive composite laminates with complex damage scenarios
2022 Zappalorto, M.; Carraro, P. A.; Quaresimin, M.
Modelling the in-plane thermoelectric properties of fibre-reinforced multi-directional laminates
2022 Carraro, P. A.; Paipetis, A. S.; Pontefisso, A.; Quaresimin, M.; Tzounis, L.; Zappalorto, M.
A review on failure theories and simulation models for adhesive joints
2021 Tserpes, K.; Barroso-Caro, A.; Carraro, P. A.; Beber, V. C.; Floros, I.; Gamon, W.; Kozlowski, M.; Santandrea, F.; Shahverdi, M.; Skejic, D.; Bedon, C.; Rajcic, V.
Influence of manufacturing-induced defects on the fatigue performances of autoclave moulded laminates
2021 Maragoni, L.; Carraro, P. A.; Quaresimin, M.
Modelling the influence of the microstructure on the high cycle fatigue crack initiation in short fibre reinforced thermoplastics
2021 Pietrogrande, R.; Carraro, P. A.; De Monte, M.; Quaresimin, M.
On the use of elemental quantities to compute NSIFs at pointed V-notches with non-regular coarse meshes
2021 Zappalorto, M.; Pontefisso, A.; Carraro, P. A.
Prediction of the Seebeck coefficient of thermoelectric unidirectional fibre-reinforced composites
2021 Carraro, P. A.; Maragoni, L.; Paipetis, A. S.; Quaresimin, M.; Tzounis, L.; Zappalorto, M.
Stiffness degradation of symmetric laminates with off-axis cracks and delamination: an analytical model
2021 Carraro, P. A.; Maragoni, L.; Quaresimin, M.
An efficient energy-based approach for the numerical assessment of mode I NSIFs in isotropic and orthotropic notched plates
2020 Zappalorto, Michele; Carraro, Paolo Andrea