DIANI, ANDREA
DIANI, ANDREA
Dipartimento di Ingegneria Industriale - DII
A comprehensive study with high-speed camera assisted visualizations of HFO-1234ze(E) condensation inside an enhanced tube
2024 Irannezhad, Nima; Rossetto, Luisa; Diani, Andrea
Comprehensive study of flow boiling modeling inside helical micro-finned tubes: Empirical, non-convex optimization and deep learning predictive models
2024 Irannezhad, N.; Stenger, A.; Rossetto, L.; Diani, A.
Experimental and numerical analysis of the thermal performance of PCM-impregnated reticular structures obtained by additive manufacturing
2024 Nonino, C.; Rossetto, L.; Diani, A.
Machine and deep learning driven models for the design of heat exchangers with micro-finned tubes
2024 Efatinasab, E.; Irannezhad, N.; Rampazzo, M.; Diani, A.
Novel dimensionless predictive flow pattern map for HFOs inside microscale enhanced tubes
2024 Irannezhad, N.; Diani, A.
Flow Condensation of Low-GWP Zeotropic Mixtures Inside 5 mm OD Micro-Finned Tube
2023 Irannezhad, Nima; Rossetto, Luisa; Diani, Andrea
Heat Transfer and Thermal Energy Storage Enhancement by Foams and Nanoparticles
2023 Andreozzi, A.; Asinari, P.; Barletta, A.; Bianco, V.; Bocanegra, J. A.; Brandao, P. V.; Buonomo, B.; Cappabianca, R.; Celli, M.; Chiavazzo, E.; De Angelis, P.; Diani, A.; Filippeschi, S.; Iasiello, M.; Manca, O.; Nardini, S.; Nonino, C.; Rossetto, L.
Prediction of Friction Factor and Heat Transfer Coefficient for Single-Phase Forced Convection Inside Microfin Tubes
2023 Rossetto, L.; Diani, A.
Condensation heat transfer of R1234ze(E) and R134a inside a brazed plate heat exchanger: experimental data and model assessment
2022 Cattelan, Gianluca; Diani, Andrea; Azzolin, Marco
Experimental investigation on the flow condensation of R450A, R515B, and R1234ze(E) in a 7.0 mm OD micro-fin tube
2022 Diani, A.; Liu, Y.; Wen, J.; Rossetto, L.
Flow Boiling of R450A, R515B, and R1234ze(E) Inside a 7.0 mm OD Microfin Tube: Experimental Comparison and Analysis of Boiling Mechanisms
2022 Liu, Y.; Rossetto, L.; Diani, A.
Melting of phase change materials inside periodic cellular structures fabricated by additive manufacturing: Experimental results and numerical simulations
2022 Diani, A.; Nonino, C.; Rossetto, L.
Melting of paraffin waxes embedded in a porous matrix made by additive manufacturing
2021 Diani, A.; Moro, L.; Rossetto, L.
Melting of pcms embedded in copper foams: An experimental study
2021 Diani, A.; Rossetto, L.
R1234ze(E) flow boiling inside a 2.5 mm id smooth tube and comparison against an equivalent microfin tube
2021 Diani, A.; Rossetto, L.
Characteristics of R513A evaporation heat transfer inside small-diameter smooth and microfin tubes
2020 Diani, A.; Rossetto, L.
Condensation of an azeotropic mixture inside 2.5 mm ID Minitubes
2020 Diani, A.; Rossetto, L.
R513A condensation heat transfer inside tubes: Microfin tube vs. smooth tube
2020 Diani, A.; Brunello, P.; Rossetto, L.
R513A flow boiling heat transfer inside horizontal smooth tube and microfin tube
2019 Diani, A.; Rossetto, L.
Transient melting of paraffin waxes embedded in aluminum foams: Experimental results and modeling
2019 Diani, A.; Campanale, M.